Open Access
Refine
Document Type
- Article (146)
- Conference Proceeding (104)
- Report (19)
- Doctoral Thesis (10)
- Patent (1)
Is part of the Bibliography
- yes (280) (remove)
Keywords
Institute
Intelligente Lastkollektivoptimierung für Erprobungen von elektrischen und hybriden Antriebssträngen
(2019)
Application of a robotic THz imaging system for sub-surface analysis of ancient human remains
(2019)
We used a robotic-based THz imaging system to investigate the sub-surface structure of an artificially mummified ancient Egyptian human left hand. The results obtained are compared to the results of a conventional CT and a micro-CT scan. Using such a robotic THz system promises new insights into the sub-surface structure of human remains. The depth resolution of the THz images exceeds the resolution of a conventional CT scan and is comparable with a micro-CT scan. The advantage of THz measurements over micro-CT scans is the fact that even comparatively large samples, like complete bodies, can be scanned. These would not fit into a conventional micro-CT scanner.
Integrated laser based pre‐tempering at laser welding of AISI 1045 steel by using 3D‐scanner optics
(2021)
Fluorescence Microscopy-Based Quantitation of GLUT4 Translocation: High Throughput or High Content?
(2020)
Preliminary study: Polishing force measurement by viscosity - the return of ketchup polishing
(2021)
Pharmaceutical agents or drugs often have a pronounced impact on protein-protein interactions in cells, and in particular, cell membranes. Changes of molecular conformations as well as of intermolecular interactions may affect dipole-dipole interaction between chromophoric groups, which can be proven by measuring the Förster resonance energy transfer (FRET). If these chromophores are located within or in close proximity to the plasma membrane, they are excited preferentially by an evanescent electromagnetic wave upon total internal reflection (TIR) of an incident laser beam. For the TIR-FRET screening of larger cell collectives, we performed three separate steps: (1) setting up of a membrane associated test system for probing the interaction between the epidermal growth factor receptor (EGFR) and the growth factor receptor-bound protein 2; (2) use of the Epac-SH188 sensor for quantitative evaluation under the microscope; and (3) application of a TIR fluorescence reader to probe the interaction of GFP with Nile Red. In the first two steps, we measured FRET from cyan (CFP) to yellow fluorescent protein (YFP) by spectral analysis and fluorescence lifetime imaging (FLIM) upon illumination of whole cells (epi-illumination) as well as selective illumination of their plasma membranes by TIR. In particular, TIR excitation permitted FRET measurements with high sensitivity and low background. The Epac sensor showed a more rapid response to pharmaceutical agents, e.g., Forskolin or the A2B adenosine receptor agonist NECA, in close proximity to the plasma membrane compared to the cytosol. Finally, FRET from a membrane associated GFP to Nile Red was used to test a multi-well TIR fluorescence reader with simultaneous detection of a larger number of samples.
Forming complex parts out of high and ultra-high strength aluminium alloys has proved to be more challenging in comparison to the currently used deep drawing steels. Nevertheless, aluminium alloys show a limited formability in contrast with, for example, deep drawing steels. Novel processes like Warm-forming, W-Temper or Hotforming, offer the potential to produce light and highly integrated one-piece components from such aluminium alloys at elevated temperatures. When considering aluminium alloys of the 7000 group, which can reach strength values (UTS) of about 600 MPa, crash components such as side impact bars would offer a suitable field of application.
Forming at elevated temperatures, in particular with the Hotforming process, offers high potential in the production of complex structural components on the one hand and in the use of existing press hardening equipment on the other. To date, the material behaviour of aluminium alloys in the 7000 group, applied in such processes and in the later final state after forming, is not sufficiently known.
Therefore, in this study, systematic investigations on the formability and the final strength during and after forming at elevated temperature of the EN AW-7075 aluminium wrought alloy from different suppliers are conducted. In general, material- and damage/ failure models were created and implemented into simulation in order to make predictions. Characterisation of the plastic material properties on the basis of various tensile specimens as shear-, notched-, tensile- and Erichsen tests are carried out to adapt the complex material- and failure models such as Barlat YLD2000 and GISSMO to the experimental values using a parameter optimisation. These were made for the material conditions during forming, i.e. after solution heat treatment, the final condition after artificial ageing at 180°C for 20 minutes, which corresponds to the cathodic dip coating, and the T6 condition, which is the highest strength condition.
To evaluate a suitable friction coefficient for high temperature forming processes, anti-friction agents are screened, and the potential applicability evaluated by strip-drawing tests. Thereby, using an analytical relationship, friction coefficients are determined at room temperature and 180°C, which are used as corresponding friction model for the finite element forming simulation.
Crash simulations using the nonlinear finite element method (FEM) of side impact protection beams are used to demonstrate the weight saving potential of high and ultra-high strength aluminium alloys compared to a beam made of press hardened steel. A weight saving of about 20 % could be achieved with the same crash performance. This can be significantly increased to around 30 % - 40 % by using local reinforcements such as CFRP or GFRP (carbon/ glass fibre reinforced plastic) patch. For this reason, a novel process was developed which is based on the conventional Hotforming process with an integrated thermal direct joining step called “Extended Hotforming”.
Subsequently, a heatable forming tool for the production of a serial like sheet metal side impact beam was developed to validate the finite element simulation and to demonstrate the potential of the forming processes at elevated temperatures for aluminium sheet metal components.
Lösungsansätze
(2021)
Direct digital manufacturing – the role of cost accounting for online hubs to access industry 4.0
(2021)